|
【Product Specifications】
Color: Black/White
Base: E26
Size: About: Diameter 40 x Length 147.5 (mm)
Weight: 150g
Load: up to 400g
Input: AC100-240V 3A
Rated voltage: 100V (50/60Hz)
Package Contents: Light Socket Body, Instruction Manual
*Bulbs are sold separately and are not included.
*To secure the bending angle, please use a light bulb of 400g or less.
◆ Rotation 350 degrees, up and down 90 degrees movable. The angle can be adjusted freely and can be adjusted to your preferred angle.
◆Two colors, black and white, are also available. You can choose the color according to your mood and taste.
◆It plays an active part as interior at the same time as lighting. With its simple design, it goes well with various places and equipment, and can create a wonderful space.
【Notes】
1. Due to the nature of the product, the paint may come off easily when the moving parts are moved many times.
Please refrain from purchasing if you are concerned.
2. To ensure the bending angle, do not install bulbs over 400g.
3. Be sure to turn off the power before installing.
4. Please note that if you tighten the light bulb too much, the socket may be damaged.
5. Be sure to turn off the light before adjusting the irradiation angle.
6. Do not touch the lamps and fixtures while they are on and immediately after they are turned off as they are hot.
7. To avoid fire hazard, do not exceed the recommended wattage of the bulb.
■Failures caused by continuous operation for 24 hours are not covered by the warranty.
Continuous operation for 24 hours increases the likelihood of failure. Be sure to rest for 30 minutes every 12 hours. If it has been operated continuously for more than 12 hours, please wait for at least 30 minutes before restarting operation.
|
|---|
